MIL-PRF-49291D
-
FOTP-74 IEC-60793-1-53 Optical Fibres Part 1-53: Measurement Methods
and Test Procedures Water Immersion
-
Part 1-40: Measurement Methods and Test Procedures - Attenuation.
-
Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power.
(DoD adopted)
Measurement of the Effective Area of Single-Mode Optical Fiber.
-
FOTP-133 IEC-60793-1-22 Optical Fibres Part 1-22: Measurement Methods
and Test Procedures Length Measurement
-
Mode Field Diameter Method in the Far-Field. (DoD adopted)
-
Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the
Differential Phase Shift Method. (DoD adopted)
-
Method for Measuring Optical Fiber Cross-Sectional Geometry by Automated
Grey-Scale Analysis. (DoD adopted)
Numerical Aperture Measurement of Graded-Index Optical Fibers. (DoD
adopted)
-
Measurements of Strip Force for Mechanically Removing Coatings from
Optical Fibers. (DoD adopted)
-
FOTP-195 IEC-60793-1-21 Optical Fibres Part 1-21: Measurement
Methods and Test Procedures Coating Geometry .
Measurement of Bandwidth on Multimode.
-
Differential Mode Delay Measurement of Multimode Fiber in the Time
Domain
(Copies of these documents are available online at https://www.tiaonline.org or from the
Telecommunications Industry Association/Electronic Industries Association, 2500 Wilson Boulevard, Suite
300, Arlington, Virginia 22201-3836.)
NATIONAL AERONAUTICAL AND SPACE ADMINISTRATION (NASA)
-
Flammability, Odor, Offgassing, and Compatibility Requirements and Test
Procedures for Materials in Environments that Support Combustion.
(Copies of these documents are available online at https://nepp.nasa.gov/ or from the Office of Safety
and Mission Quality, (code QR), NASA, Headquarters, Washington, DC 20546.)
NCSL INTERNATIONAL
-
Requirements for the Calibration of Measuring and Test Equipment
(Copies of this document are available online at https://www.ncsli.org/ or from National Conference of
Standards Laboratories, 2995 Wilderness Place, Suite 107, Boulder, CO 80301.)
(Non-Government standards and other publications are normally available from the organizations which
prepare or which distribute the documents. These documents also may be available in or through
libraries or other informational services.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related associated specifications or specification sheets), the text of
this document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business